Workstation 5A Setup Guide - Fourth Edition 2-13
Workstation 5A BIOS
PnP
PnP
This selection enables or disables PnP support for legacy operating systems
such as Windows 95, Windows 98, and Windows NT. It also allows the IRQ
and DMA (Direct Memory Access) resources to be individually reserved for
Plug and Play.
The Advanced Configuration and Power Interface (ACPI) replaces PnP in
recent operating system such as POSReady 2009 or Windows 7.
Figure 2-9: BIOS System Configuration Utility - PnP Tab
All settings are factory configured and should not be changed.
To Next Page
Loading...
Need help?
General
