Workstation 5A Setup Guide - Fourth Edition 3-15
What’s Inside?
System Board Description
Interfaces
The Pineview-M N450 integrates Memory Controller, Graphics Controller,
Direct Media Interface and single or dual core CPU housed in a single die.
Integrated Memory Controller (ICM)
The Integrated Memory Controller supports DDR2 protocols and a
single 64-bit wide channel to access two SO-DIMMs.
Single Channel DDR2 Controller supports data transfer rates of 667
M/T.
Non-ECC, unbuffered DDR2 SO-DIMMs only.
512 Mb, 1GB, and 2GB DDR2 memory technologies supported.
The System Board includes two SO-DIMM socket supporting a
maximum of 2GB which may be used for WIN32 operating
systems such as POSReady 2009. The Windows Embedded CE 6.0
R3 image is limited to 512MB of RAM.
Graphics Processing Unit (GPU)
The GPU is composed of engines, planes, pipes, and ports. The GPUs
3D/2D engines are fed with data through the integrated memory
controller. The outputs of the engines are surfaces sent to the memory,
then retrieved and processed by the processor planes. Feature
highlights include:
3rd generation graphics controller refresh
Intel Dynamic Video Memory Technology
DirectX 9
®
compliant Pixel Shader 2.0
200 MHz render clock frequency (N450)
2 Independent Display Ports:
Single LVDS Channel to the workstation 15” LCD at 1024x
768
Analog RGB display output on the IO panel supports
resolutions up to 1400x1050 @ 60hz.
Intel
®
Clear Video Technology
MPEG2 Hardware Acceleration
The second generation Intel Atom offers improved graphics
performance over previous Intel Atom platforms such as Navy Pier in
three ways:
Move the graphics and memory controllers into the processor
package.
Increase the system front side bus speed from 533Mhz to 667MHz.
To Next Page
Loading...
Need help?
General
