4-28 Workstation 5A Setup Guide - Fourth Edition
Installing and Operating the Workstation 5A
Workstation 5A Recovery
BIOS Q1010m (Login and Password Required)
This BIOS version, distributed through a CE Platform update to support the
SparkLan Mini-PCI WiFi Card, requires a pre-assigned login and recovery
password to continue.
• The workstation restarts, displays the Blue Splash screen, then:
• Prompts for a login:
Type M1cr0s and press [Enter].
• Prompts for a password:
Type Quant1c0 and press [Enter].
• When the login and password have been entered correctly, then:
“Factory Recovery In Progress - Please Wait...”
• Windows CE Factory Restore takes from three to five minutes to
complete, then formats the CF Card. The Workstation 5A restarts
and boots to Windows CE in the out-of-box state.
BIOS Q2010g and Q2011d (Password Required)
This BIOS version, by default, requires a pre-assigned password to
continue. The password can be disabled, but is not recommended.
• The workstation restarts, displays the Blue Splash screen, then:
• Prompts for a password to continue if the feature has not been
disabled.
Type: Quant1c0 and press [Enter].
• If the password is entered correctly or disabled, then:
“Factory Recovery In Progress - Please Wait...”
• Windows CE Factory Restore takes from three to five minutes
to complete, then formats the CF Card. The Workstation 5A
restarts and boots to Windows CE in the out-of-box state.
To Next Page
Loading...
