Copyright© Orphée SA. All Rights Reserved.
2.3.4 Mono electronic board
The mono electronic board is located between the hydraulic part and the reagent tray.
The board, driven by a 32-bit processor, manages the following parts:
- Sample needle, rocker, syringe block motors,
- Display and keyboard,
- Connexion mode (RS232, Ethernet, …),
- Printer,
- Measurement (Counting, hemoglobin measurement),
- Data processing,
- External barcode reader.
To avoid all deterioration risks, only the service people can touch this electronic board.
2.3.5 Power Supply Block
MYTHIC 22 is supplied with an external power supply block.
- In the case of replacement of the main power wire supplied with the MYTHIC 22 the new
one must comply with the local regulation.
-
The MYTHIC 22 has been certified with the power supply box provided with the
instrument. - The use of another external power supply box is not guaranteed.
Please contact
your Orphée’s representative.
To Next Page
Loading...