What to do if Orphee mythic 22 Laboratory Equipment shows 'No result' and 'No HGB & WBC'?
If your Orphee Laboratory Equipment displays 'No result' and you suspect it's due to 'No HGB & WBC', begin by verifying the lyse level. Next, ensure the lyse tubing is correctly connected to the WBC bath. Lastly, inspect valve number 9.
What to do if Orphee Laboratory Equipment shows 'No result' and 'No HGB'?
If your Orphee Laboratory Equipment shows 'No result' and the cause is 'No HGB', verify the lyse level, ensure the correct lyse tubing connection to the WBC bath, and check valve number 9.
How to fix 'Rejection Flag INS_H' on Orphee mythic 22?
To address a 'Rejection Flag INS_H' on your Orphee Laboratory Equipment, close the door and perform a new Start Up cycle. Repeat the Start Up cycle again.
What to do if Orphee Laboratory Equipment shows 'No result' and 'No HCT & PLT'?
If your Orphee Laboratory Equipment displays 'No result' and the cause is 'No HCT & PLT', check the bath wires. Then, perform a cleaning cycle, and if the issue persists, follow with a bleach cycle.
What to do if Orphee mythic 22 shows 'No result' but 'HGB OK'?
If your Orphee Laboratory Equipment displays 'No result' but 'HGB OK', check the bath wires. If the issue persists, perform a cleaning cycle followed by a bleach cycle. If still unsuccessful, change the aperture block.
What to do if Orphee mythic 22 Laboratory Equipment shows 'No result or bad stability' but 'HGB & WBC OK'?
If your Orphee Laboratory Equipment displays 'No result or bad stability' but 'HGB & WBC OK', perform a back flush cycle, and if the issue persists, follow with a bleach cycle. Check valves number 12, 13, 16 & 17. Also, verify the reagent and enclosure temperature and check the preamp connection wires.
What to do if Orphee Laboratory Equipment shows Rejection Flag INS_H?
If your Orphee Laboratory Equipment shows a rejection flag INS_H, close the door and perform a new Start Up cycle. Repeat the Start Up cycle if needed.
How to fix bad stability in Orphee mythic 22?
If your Orphee Laboratory Equipment has bad stability, perform a Back flush and a Cleaning Cycle, followed by a Bleach cycle if the issue persists. Also, check the level bubble flow in the WBC bath during the run cycle, and verify the reagent and enclosure temperature.
What to do if Orphee Laboratory Equipment shows no result but HGB is OK?
If your Orphee Laboratory Equipment shows no result, and HGB is OK, check the bath wires. If the issue persists, perform a Cleaning Cycle and then a Bleach cycle. If still unsuccessful, change the aperture block.
What to do if Orphee mythic 22 Laboratory Equipment shows no result, no HCT & PLT?
If your Orphee Laboratory Equipment shows no result and there is no HCT & PLT, check the bath wires. Perform a Cleaning Cycle and then a Bleach cycle if unsuccessful.
Manufacturer's declaration on electromagnetic emissions for the MYTHIC 22.
Manufacturer's declaration on electromagnetic immunity for the MYTHIC 22.
Procedures for safely unpacking the MYTHIC 22 instrument.
Requirements for the installation location and environment of the MYTHIC 22.
Details on connecting the MYTHIC 22 to power and other devices.
Instructions for connecting the printer to the MYTHIC 22.
Steps for connecting, replacing, and priming reagents for the MYTHIC 22.
Guidelines for transporting and storing the MYTHIC 22 instrument.
Explains hazard warning symbols and their meanings.
Explains important additional information symbol.
General description of the MYTHIC 22 hematology analyzer.
Overview of the main parts of the MYTHIC 22 instrument.
Detailed description of the main components of the MYTHIC 22.
Procedure for logging in and identifying users on the MYTHIC 22.
Configuration options for language, printer, and system settings.
Advanced configuration menus for biologists and technicians.
Performance specifications for analysis, including throughput, sample volume, and principles.
Specifications, application, and precautions for reagents.
Examples of specimens causing errors and actions to take.
Procedure for starting up the MYTHIC 22 instrument.
Procedures for sample collection and preparation before analysis.
Detailed procedure for running sample analysis.
Display and interpretation of analysis results and flags.
Procedures for putting the instrument in standby or shutting it down.
Accessing the quality control menu and managing lots.
Procedure for running control blood samples.
Performing and analyzing repeatability tests.
When and how to perform instrument calibration.
Modifying target values and creating new batches for calibration.
Explanation of the impedance technique for cell counting.
Explanation of the optical detection system for five-part differential analysis.
Explanation of various flags indicating potential issues.
Description of the instrument's hydraulic modules.
Importance of maintenance and a detailed maintenance schedule table.
Procedures for repairing the instrument.
Guide to resolving common instrument problems.
Viewing and printing error logs for troubleshooting.
General| Brand | Orphee |
|---|---|
| Model | mythic 22 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page