Orphee mythic 22 - Baths Dismantling

9. SERVICE
REF : M22/UM/EN/014
Page 92/105
Copyright© Orphée SA. All Rights Reserved.
MYTHIC 22
9.4.3 Baths dismantling
This procedure must be carried out to replace the bath seals on the manifold or the aperture seals.
Wear rubber gloves and wash hands with a disinfectant after completion of work.
- From the MAIN MENU, press then press
.
- Press to perform a draining of the counting baths.
- Open the door located on the right side of the instrument to have access
to the hydraulic part.