Copyright© Orphée SA. All Rights Reserved.
- To drain the counting baths the flow cell and the waste syringes, press
.
- To fill the counting baths and the flow cell with diluent, press
.
- To perform a cleaning of the aperture blocks and the flow cell with the
cleaner, press .
- To perform a back flush in the aperture blocks and the flow cell, press
.
9.3 MECHANICS
- To have access to this cycle, press from the MAIN
MENU, then press .
see page 89
performs a complete test of the needle.
performs a complete test of the rocker.
performs a complete test of the syringe.
see page 89
switch on (or off) the HGB led to check it.
switch on (or off) the optical led to check it.
see section 9.4.2.
see section 9.1.3.