Copyright© Orphée SA. All Rights Reserved.
WBC CURVE FLAGS:
This curve is done by the WBC channel measurement and does not appear on the normal results screen. The
flags L1 and L5 complete the flags N2 and IC.
L1 = Presence of platelets
aggregate, erythroblast or small
lymphocytes at the left of CL1.
L5 = Presence of immature cells at the right of CL5.
8.5.4 Erythrocyte and HGB Flags
R1 = Abnormal quantity of microcytes at the left side of CR1.
R2 = Abnormal quantity of macrocytes at the right side of CR2.
HGB: * means bad measure of the HGB blank.
8.5.5 Platelets Flags
P1 = 0 to CP1
: Presence of abnormal quantity of debris
or small cells.
P2 = P to CP2: Presence of schizocytes.
P3 = CP3 to CP3-2: Presence of microcytes.
8.5.6 QC Flags
QC_F: QC Failed means that the results are outside the limits entered for one or several parameters (see
section 6.2.1).
QC_ND: QC Not Done means that the Quality Control has not been done or that the analysis are done with
QC results outside the limits (see section 6.2.1).
8.5.7 STARTUP Flags
SU_F: STARTUP Failed means that the results are outside the limits for one or several parameters (see
section 5.4).
SU_ND: STARTUP not done means that the Start Up has not been done or that the analysis is done with
results of the Start Up outside the limits (see section 5.4).
To Next Page
Loading...