Orphee mythic 22 - Page 39

REF : M22/UM/EN/014
3. INSTRUMENT SET UP
MYTHIC 22
Copyright© Orphée SA. All Rights Reserved.
Page 39/105
Reagent Consumption (ml): Software Version since V2.6.0 (old cpu's model) or/and V3.2.2
CYCLES DILUENT (ml) LYSE (ml) CLEANER (ml)
Run Sample
DIF
21.27
0.95
0.61
DIF (ALTITUDE)
21.27
0.95
0.61
CBC
13.67
0.74
0.61
CBC (ALTITUDE)
13.67
0.74
0.61
Drain All
--
--
--
Rinse All
10.27
0.21
0
Backflush
20.88
0.43
11.59
Control
14.87
0.22
0.52
Reagent Prime
All
38.59
5.53
4.94
Lyse OnlyOne
5.54
6.51
--
Diluent
30.03
--
--
Cleaner
--
--
5.10
Cleaning (Manual & Auto)
18.43
0.45
26.71
Bleach
50.37
1.55
0.42
Start Up (*)
50.92
2.85
0.60
Shut Down
0
0.00
26.71
Drain Flowcell
6.43
--
--
LATEX WBC (3)
7.05
0.00
0.00
LATEX RBC (4)
12.74
0.91
--
GCAL (1)
12.73
0.93
0
LATEX TRANS. OPT (2)
12.73
0.93
--
LATEX ADJ. OPT (5)
6.38
0.16
--
Clean out
50.37
1.55
0.42
OPTICAL Led Adjust
6.38
0.16
--
(*) : Consumption with one start Up cycle.
(1) : FSC and ALL optical gain adjustment (GCAL) .
(2) : Transverse adjustment on optical bench (RUN).
(3) : Adjust Wbc resistive gain on capacymetric system.
(4) : Adjust Rbc/Plt resistive gain capacymetric system.
(5) :FSC and ALL optical gain adjustment (LATEX). Used only in case of lack of G-CAL.
POWER SUPPLY BLOCK:
Dimensions: Height: 55 mm
Width: 127 mm
Depth: 230 mm
Weight: 1,32Kg
Power supply Input: 100 to 240VAC (2A/230VAC at maximum load – 4A/115VAC at maximum load)
50-60Hz