Panasonic FP0 - Page 252

14-10
FP0
Item
Add-
ress
Name
Default
value
Descriptions
Do not
set X3
as high-
speed
counter.
CH2
Do not set X3 as high-speed counter.
2-phase input (X3, X4)
2-phase input (X3, X4),
Reset input (X5)
Incremental input (X3)
Incremental input (X3), Reset input (X5)
Decremental input (X3)
Decremental input (X3),
Reset input (X5)
Individual input (X3, X4)
Individual input (X3, X4),
Reset input (X5)
Direction decision (X3, X4)
Direction decision (X3, X4),
Reset input (X5)
Do not
set X4
as high-
speed
counter.
CH3
Do not set X4 as high-speed counter.
Incremental input (X4)
Incremental input (X4), Reset input (X5)
Decremental input (X4)
Decremental input (X4), Reset input (X5)
Input
setting
401
High-
speed
counter
mode
settings
(X3 to X5)
Setting
by
progra-
mming
tool
soft-
ware
H0
CH2/
CH3
Note1) If the operation mode is set to 2-phase, individual, or direction differentiation, the setting for CH3
is invalid.
Note2) If reset input settings overlap, the setting of CH3 takes precedence.
Note3) If system register 400 to 403 have been set simultaneously for the same input relay, the following
precedence order is effective: [High-speed counter] ‘[Pulse catch]’ [Interrupt input].