Feature Storing Method Details in
Last Number Redial
(Outgoing Call Log)
The last or most recent dialed numbers are
automatically stored.
® 17.1.1 Redial,
Last Number
Speed
Dialing
Personal
• Personal Programming
• Personal
Operation with the Feature Number
• System Programming
(PC Programming only)
® 18.1.9 Speed
Dialing, Personal
System System Programming
® 18.1.10 Speed
Dialing, System
Quick Dialing System Programming
(PC Programming only)
® 16.1.1 Quick
Dialing
Hot Line
• Personal Programming
• Personal
Operation with the Feature Number
• System Programming
(PC Programming only)
® 9.1.6 Hot Line
Incoming Call Log Incoming call information is automatically stored.
® 4.1.5 Call Log,
Incoming
2. Valid Input
Input
Displayed while
Entering
Description
0–9/ /# 0–9/ /# Store digits, and # by pressing the
corresponding buttons.
PAUSE (Pause) P Store a dialing pause by pressing the
PAUSE button. (® 15.1.2 Pause
Insertion)
FLASH/RECALL
(Hooking)
*1
F Store a flash/recall signal (EFA
mode) by
pressing the FLASH/RECALL button at
the beginning of the number. (®
6.1.1 EFA (External Feature Access))
INTERCOM (Secret)
*1
[ ] Conceal all or part of the number by
pressing the INTERCOM button at the
beginning and at the end of the number
to be concealed. It is programmable
whether
the concealed part will be shown
on the SMDR. (® 18.1.6 SMDR (Station
Message Detail Recording))
TRANSFER (Transfer)
*1
T Store a transfer command by pressing
the TRANSFER button at the beginning
of the number (used only for One-touch
Dialing). (® 4.1.10 Call Transfer)
[Example] Storing "T + 305"=
Transferring a call to extension 305.
*1
Available only when in the system/personal programming mode
232 Feature Manual Document Version 2016-03
13.1.2 MEMORY DIALING FEATURES
To Next Page
Loading...
