Extension
Number
Extension Name COS
: : :
3. In the COS settings, ensure that access to trunk group 3, as assigned in step 1, is not blocked for the
selected COS (COS 2, as assigned in step 2), but is blocked for all other COS.
® 10.7.2 PBX Configuration—[2-7-2] System—Class of Service
—External Call Block
Programming example
COS
Number
Outgoing Trunk Group
1 2
3 4
1
´
2
3
´
4
´
:
´
´: Blocked
Similarly,
it is possible to create a System Speed Dialing directory for a site by grouping all extensions at that
site as a tenant (® 19.1.2 Tenant Service).
Networks that span multiple time zones
The time zone is set independently for each PBX in a One-look network. The PBX can acquire the current time
either automatically from the Master unit, an NTP (Network Time Protocol) server or caller ID information over
ISDN, or the time can be set manually.
Certain PBX features use the local PBX's time information during operation, and other features use the Master
unit's time information. The following table lists which features use which time information:
Feature Time Source
Times in the Incoming log Local PBX
ARS route plan Local PBX
Time mode Local PBX
Timed reminder Local PBX
Holiday table Local PBX
Time Table Depends on system programming
*1
Summer time (Daylight saving time) Local PBX
Hospitality features Master unit
SMDR information Master unit
Master password Local PBX
Scheduled update Local PBX
Periodic maintenance Local PBX
Document Version 2016-03 Feature Manual 243
14.1.4 One-look Network
To Next Page
Loading...
