The current time mode can switch automatically to another time mode at the preprogrammed time assigned
in the Time Table. It is possible, however, to switch time modes manually.
Whether time modes are normally switched manually or automatically is determined through system
programming. Each tenant is assigned a switching mode.
Time Mode
Switching
Description Condition
Automatic The current time mode will switch
automatically to another time mode
at the time programmed in the
tenant’s Time Table, and can be
switched manually by pressing the
Time
Service button or by dialing the
Time Service Switch feature
number.
The current time mode (day/lunch/
break/night) and the switching mode
(automatic/manual) can be switched
manually by an extension assigned
as a manager, or by an extension
whose Class of Service (COS) is
authorized.
The Unified Messaging System
Manager can set the time service
mode from an outside telephone.
Manual The current time mode will switch
only when the Time Service button
is
pressed or when the Time Service
Switch feature number is dialed.
2. Time Table
Each tenant has a Time Table that is used when the tenant is in Automatic Time Service Switching mode.
Each Time Table has four basic modes—day, lunch, break, and night—and also provides for multiple
"breaks", such as morning breaks and afternoon breaks, and multiple "days", such as the morning shift
and the afternoon shift following lunch.
A tenant’s Time Table is programmed to control when each time mode starts (and therefore, ends) and
can be programmed separately for each day of the week.
Each Time Table has a number which corresponds to the tenant number of the tenant it serves. (Tenant
1 uses Time Table 1, etc.)
[Programming Example: Time Table]
MON
TUE
Day 1
Lunch
Day 2
Break 1 start
Break 1 end
Break 2 start
Break 2 end
Night
Day 1
09:00
12:00
13:00
15:00
15:15
18:00
09:00
1 2 3 4
15:00
18:30
19:00
20:30
20:45
22:30
22:45
01:00
15:00
11:00
22:00
11:00
12:00
15:00
18:00
06:00
06:15
21:00
21:15
06:15
Time Schedule
Time Table No. (Tenant No.)
372 Feature Manual Document Version 2016-03
19.1.3 Time Service
To Next Page
Loading...
