181
Refer to “Response Data” (P.174) for details of the abnormal reception response data.
Readout response data
Description of data
Name
Data
length
Outline Content
File number 3
The file number change indicates the file
number to be used, and the file number
readout indicates the currently using file
number.
“001” to “120”
If the specified file does not exist, the abnormal reception response telegram “NAK11” is returned.
If perform of marking trigger is sent in this state, the contents of the previous file number are
marked.
STX FNO A [File number] (3 Bytes)
(Check sum)
Delimiter
To Next Page
Loading...
