Panasonic LP-310 - Page 73

73
Check [Zero indication].
Check “ Zero indication” for setting.
The display state is set with “ Zero indication
” .
Press .
Continuously, set “2” to [Figure].
Set the display digit using button.
Check [Minute].
Check “ Minute” for setting.
The unit is set to “Minute” with “ Minute
” .
Check [Zero indication].
Check “ Zero indication” for setting.
The display stateO is set with “ Zero indication
” .
The display digit can be set among 1 to 6.
FUNC. INPUT
REFERENC
E
6
7
8
9
10