1-16 Programming Your Application
690+ Series Frequency Inverter
Parameter Descriptions
PENDING
Range: FALSE / TRUE
Indicates that an auto restart will occur after the programmed delay.
RESTARTING
Range: FALSE / TRUE
Indicates that an auto restart is occurring. TRUE for a single block diagram execution cycle.
ATTEMPTS LEFT
Range: —.
Indicates the number of attempts left before an external fault reset is required.
TIME LEFT
Range: —.x s
When in the Restarting state, this parameter indicates the time left before an auto restart
attempt will be permitted. When non-zero, this value is unaffected by changes to ATTEMPT
DELAY 1.
To Next Page
Loading...
