Parker ac890 - Page 228

The Keypad
Page 8-30 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
DEFAULT TO 60HZ
The setting of this parameter selects the drive operating frequency. It affects those parameters whose values
are dependent upon the default base frequency of the drive. Settings will only be updated following a
“restore macro” operation.
The default is 50Hz (6511 keypad = 0 , 6901 keypad = FALSE).
Refer to Appendix D: “Programming” - Frequency Dependent Defaults.
RESTORE DEFAULTS
Refer to “Resetting to Factory Defaults (2-button reset)”, page 8-51.