Parker ac890 - Page 375

Programming
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D Page D-25
8
9
10
A
B
C
D
E
1
2
3
4
5
6
7
Parameter Descriptions
FBK OPT. TYPE
PREF: 136.03 Default: 0 Range: See below
Set this parameter to define the kind of feedback board fitted in Slot F on the drive.
Enumerated Value : FBK OPT. TYPE
0 : NONE There is no board fitted in Slot F
1 : ENCODER An encoder (ENDAT SinCos, RS485 or HTTL) board is fitted in slot F
2 : RESOLVER A resolver board is fitted in Slot F
3 : TYPE 3 Reserved for future use
4 : TYPE 4 Reserved for future use
5 : TYPE 5 Reserved for future use
6 : TYPE 6 Reserved for future use
7 : TYPE 7 Reserved for future use