Parker ac890 - Page 376

Programming
Page D-26 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
A
B
C
D
E
1
2
3
4
5
6
7
Parameter Descriptions
SLOT1 OPT. TYPE
PREF: 136.04 Default: 0 Range: See below
Set this parameter to define the kind of option board fitted in Slot A on the drive.
Enumerated Value : SLOT1 OPT. TYPE
0 : NONE There is no board fitted in Slot A
1 : RS485 Reserved for future use
2 : PROFIBUS Profibus communication board
3 : LINK Reserved for future use
4 : DEVICE NET DeviceNet communication board
5 : CAN OPEN CANopen communication board
6 : LONWORKS Reserved for future use
7 : CONTROLNET Control Net communication board
8 : MODBUS PLUS Reserved for future use
9 : ETHERNET Ethernet communication board
10 : HTTL INC. ENC. HTTL incremental encoder board
11 : RS485 INC. ENC. RS485 incremental encoder board
12 : ENDAT SIN/COS Endat SIN/SOC encoder board
13 : TYPE 13 Reserved for future use
14 : TYPE 14 Reserved for future use
15 : TYPE 15 Reserved for future use