Useful information about the PC Worx software
8482_en_03 PHOENIX CONTACT 111
Output parameters
7.14 IP_INFO function block
The IP_INFO function block provides information about the current communication partner
(IP address of the communication partner, port number, and communication protocol used).
Table 7-14 Outputs of the GET_UTC_TIMESTAMP function block
Name Data type Description
SECONDS DWORD Seconds in the UTC
FRACTIONS DWORD Fractions of a second in the UTC
ERROR BOOL TRUE:
FALSE:
An error has occurred
No error has occurred, the
STATUS output provides error de-
tails
STATUS UDINT Error code of the error that has occurred
(ERROR output = TRUE)
The function is available for the AXC 1050 (XC) with a firmware version ≥ 3.00 from
AUTOMATIONWORX Software Suite 2017 Version 1.84 and later.
The function block is described in the PC Worx (Express) online help.
To Next Page
Loading...
Need help?
General
