Startup
8482_en_03 PHOENIX CONTACT 75
Settings in PC Worx Figure 6-35 shows the setting in PC Worx for using the SD card as the additional memory.
Figure 6-35 Setting the SD card as the additional memory
• In the "Device Details" window, select the "Use of external SD card" setting under "Ex-
tended Settings".
• Under "Settings", select the "Use external SD card as additional memory" setting in the
drop-down list.
• Click on the "Send" button (hidden by the drop-down list in Figure 6-35) to send the set-
ting to the controller.
• Restart the controller.
To Next Page
Loading...
Need help?
General
