Phoenix Contact AXC 1050 User Manual

Useful information about the PC Worx software
8482_en_03 PHOENIX CONTACT 89
7.3.2 Activating/deactivating the FTP server
To protect the controller against unauthorized access, it may be necessary to deactivate the
FTP server. The CPU_Set_Value_Request service with Var ID 0172
hex
is used for this. The
FTP server can be activated or deactivated with this service. The FTP server is deactivated
as soon as the applicable service has been executed.
Activation of the FTP server does not take effect until the controller is restarted. The set FTP
server state is stored in flash memory and mapped to the ETH_SRV_FTP_ACTIVE system
variable.
Value range for the CPU_Set_Value_Request service:
Figure 7-12 Deactivate FTP server
Code 02CB
hex
Var Count 1
Var ID 0172
hex
Value 0000
hex
Deactivate FTP server
0001
hex
Activate FTP server

Phoenix Contact AXC 1050 Specifications

General

Brand	Phoenix Contact
Model	AXC 1050
Category	Controller
Language	English