Description of the AXC 1050 (XC)
8482_de_03 PHOENIX CONTACT 15
3 Description of the AXC 1050 (XC)
3.1 Hardware and software requirements
3.2 General description of the controller
The AXC 1050 (XC) is a modular small-scale controller with integrated Ethernet and an
Axioline F local bus connection.
An Axioline F station is automatically created by connecting Axioline F modules to the con-
troller. The Axioline F local bus (referred to as local bus in this document) is implemented
by arranging bus base modules side-by-side.
Hardware/software Description
Controller AXC 1050 AXC 1050 XC
SD card For ordering data, see Section "Ordering data" on
page 148.
Ethernet cable Ethernet cable for connecting the controller to a PC
USB cable USB cable for connecting the controller to a PC, see Sec-
tion "Ordering data" on page 148.
Automation software versions
PC Worx
≥ 6.30*
PC Worx Express
* Part of AUTOMATIONWORX Software Suite 2017 Version 1.84
The AXC 1050 and AXC 1050 XC controllers have the same appearance. They only differ
with regard to a function. In the following, the term controller or AXC 1050 (XC) is there-
fore used in general. Where necessary, any differences are indicated accordingly.
The controller meets the requirements of classification societies for maritime applications.
For the latest approvals, please visit
phoenixcontact.net/products.
The AXC 1050 XC controller is approved for use in potentially explosive areas of zone 2.
Observe the notes in Section "Notes on using the AXC 1050 XC controller in potentially
explosive areas of zone 2" on page 11.
The AXC 1050 XC controller is approved for use under extreme ambient conditions.
Please refer to the notes in the technical data in "Ambient conditions" on page 147.
To Next Page
Loading...
Need help?
General
