Pima Hunter-Pro 32 - Microphone Unit: MIC-100; Connecting Voice Unit: VU-20

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
42
Antenna connector
TRV/TRU-100
Control Panel
PC
comax
DPR-44
To the
System
F
2
Program
TRA NSMITTER
Drawing 16- Connecting TRV/TRU-100 to control panel
3.14 Microphone Unit: MIC-100
Connect Mic-100’s IN output to the control panel’s OUT terminal.
Connect Mic-100’s OUT output to the control panel’s AUD IN terminal.
Connect MIC-100’s (-) and (+) to the detectors’ power source.
NOTE:
MIC-100 is supplied without wires.
JP5
Z6 Z7 Z8
-
+
KEY
-
S1 S2
SIREN
F3
F2
MIC Unit
TMPR
2
TMP R
1
ON/
OFF
ALARM
OUT
F4
T1
Control Panel
LINE SET
AUD
CONT
IN
OUT
IN
OUT
+
GND(-)
Drawing 17- Connecting MIC-100 to control panel
3.15 Connecting Voice Unit: VU-20
Connect VU-20’s TR input to the control panel’s CONTROL output
Connect VU-20’s AUDIO output to the control panel’s AUD IN input