Pima Hunter-Pro 32 - Wireless Test; Wireless TAMPER Test

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
79
Untested Zones:
UT: Living Room
and if all zones were tested:
Untested Zones:
All Zones Tested
Use
and keys to scroll between the zones.
This test is extremely useful at the end of installing the system in order to
make sure all the zones are in order and connected to the system.
5.11.2 Wireless Test
0
ENTR
ENTR
NEXT
Tests
ENTER/NEXT/END
Wireless Test
ENTER/NEXT/END
Wait for Trans.
Zone 32
10 Z32
RSSI Level Zone Name Zone No.
9
This test is a walk-test (similar to that in the previous section) yet only for
wireless detectors. A transmission from a detector will activate a display of the
detector’s RSSI and be recorded in the memory log.
This test is extremely useful for finding the best location for wireless detectors
and their optimal regularity.
5.11.3 Wireless TAMPER Test
0
ENTR
ENTR
NEXT
Tests
ENTER/NEXT/END
Wireless Test
ENTER/NEXT/END
X2
W.less Test: Tmpr
ENTER/NEXT/END
ENTR
9
This test is for checking a single wireless detector using the detector’s tamper.
The system will present only the tamper signals receives from the detectors.
This test is extremely useful for finding the best location for a specific wireless
detector and when there is motion in the rest of the system’s zones.