HUNTER-PRO 32 Intruder Alarm System - Installation Manual
52
NOTE:
When the parameter (M) is enabled (User Code>Menu) in General
Parameter screen (see section 5.6), it is possible to enter the user menu
directly without long-pressing the key. In this case, actions such as
arming and disarming are not automatically activated and the
arming/disarming key must be pressed. For example, for arming the
system you enter the user code, and then press the key.
User Code is not authorized to change Master Code.
4.3.2.3 Using Technician Code
TECHNICIAN CODE
0
9
9
User Menu
Choose 1,2..
NOTE:
When the User Menu is accessed with Technician Code, it is impossible to
change codes.
To Next Page
Loading...
