Pima Hunter-Pro 32 - Programming Outputs Time

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
69
Entry 1 2 Exit
20 20 60
5.5.2 Programming Outputs Time
4
ENTR ENTRNEXT
Timers, Counters
ENTER/NEXT/END
Output Timers
ENTER/NEXT/END
In this screen the various output times in the system are programmed.
NOTE:
The programmed time in this screen is the time that takes an output to return
to its previous state. If time is defined as zero (0), the output will change its
state until further order that will change that (i.e. no time limit).
Siren Relay Card
240 240 0
Siren
Relay Output Card for OUT-1000 outputs
SMOKE ON/OF ALARM
60 240 240
Smoke output ON/OFF ALARM output
EXP1 EXP2 EXP3
240 240 240
Relay outputs
in Expender 1
Relay outputs
in Expender 3
Relay outputs
in Expender 2
Use
and to navigate inside a screen
Use
to move to save data and move to the next screen