Pima Hunter-Pro 32 - General Parameters Second Screen

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
73
Par. Para. Full name
Note
K Key State (+) Switch key
(-) Momentary key
D DC Siren (+) DC Siren
(-) Horn Siren
1 TAMPER 1 (+) TAMPER 1 connected
E TAMPER 1 (+) TAMPER 1-EOL protected
2 TAMPER 2 (+) TAMPER 2-connected
E TAMPER 2 (+) TAMPER 2-EOL protected
K Key->Home state (+) Arming with key will activate HOME 1
A Automatic->Home (+) Automatic arming will activate HOME 1
B Bypass zone (automatic) (+) If there are opened zone when arming
with key/Auto Arming, the system will
bypass all the opened zones.
(-) Opened zones will trigger the alarm
2 2 EOL (+) 2 EOL for each zone:
S Siren beep activated (+) When arming system the siren will beep
once and when disarming the system with
key/remote control the siren will beep
twice.
M User code>menu: (+) Typing user code will direct you to the
User Menu.
(-) User code will arm/disarm the system.
P PIMA Display
(permanent)
Refer to section 4.3.1
Z Opened Zones scan (+) Enabled
T Bypass Tamper in
arming
(+) Enabled
F Bypass fault in arming (+) Enabled
5.6.2 General Parameters Second Screen
ABSF12Z
_------
NEXT BACK ENTR