Pima Hunter-Pro 32 - Installer Code; Tests; Walk Test

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
78
This feature is for fast-loading HUNTER-PRO 32 with parameters from the Fast-
Programmer PRG-22. The programmer needs to be connected to the right plug
in the keypad before activating this feature. Furthermore, a filed from which
the parameters are uploaded need be chosen (1 or 2).
5.10 Installer Code
ENTR
9
Installer Code
ENTER/NEXT/END
Installer Code
****** (4-6)
>Enter new code>
ENTR
9
In this menu the technician code is changed. The new code is between 4-6
numbers.
IMPORTANT!
If the Installer code begins with zero (0) the code will not reset to the
system’s default, in case of power OFF (cut AC and DC). this is another
measure taken to protect the system.
5.11 Tests
This menu is testing both wired and wireless zones, dialer, transmitter and
sirens.
5.11.1 Walk Test
0
ENTR
ENTR
Tests
ENTER/NEXT/END
Walk-Test
ENTER/NEXT/END
9
This is a general walk-test that checks all the zones activated in the system.
During the test the following screen appears:
Tested 7 of 8
The memory log keeps record of the test, including the number of zones
activated. Pressing
will present the names of the zones not tested in the
following display: