Pima Hunter-Pro 32 - System in on State; System in off State

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
75
5.7.1 System in ON State
6
ENTR
ENTR
System Response
ENTER/NEXT/END
System ON
ENTER/NEXT/END
9
In this screen you program the system responses to various events and faults
occurring when the system is
ON :
 Mains failure
 Low battery
 Zone/tamper faults
 False code
 PSTN fault
When
is pressed in any of the above System Responses screens, the
following parameter bar appears:
SRKOA123HP
++--+----+
Use
and keys to move right/left on the bar.
Each time the cursor stands on a certain parameter letter, this parameter’s full
name will spear for 3 seconds.
Pressing
on a certain parameter letter will access this parameter.
S Siren
R Relay
K Smoke output
O ON/OFF
A Alarm
1 Expender1 output
2 Expender2 output
3 Expender3 output
H Private dialer
P Report to CMS
5.7.2 System in OFF State
NEXT
6
ENTR
System Response
ENTER/NEXT/END
ENTR
System OFF
ENTER/NEXT/END
9
In this screen you program the system responses to various events and faults
occurring when the system is OFF. All screens similar to those in ON (previous
section).