Pima Hunter-Pro 32 - Zone Name; Partitioning; Zone Responses (Templates)

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
59
P Following Zone (+) Zone activates alarm only when his “paired”
zone activated alarm.
D Double Pulse (+) Zone activates alarm only after two successive
pulses occur in the duration of time set in Timers
Menu.
E Customer Cancel (+) Cancel zone before arming the system (user
cannot cancel Smoke Zone or Panic Button).
5.3.2 Zone Name
2
ENTR ENTRNEXT
Zones
ENTER/NEXT/END
Zone Name
ENTER/NEXT/END
Zone Number: 1
In this screen the zones’ names are programmed (refer to chapter 8 for further
instructions how to program names).
5.3.3 Partitioning
2
ENTR ENTRNEXT
x2
Zones
ENTER/NEXT/END
Partitioning
ENTER/NEXT/END
Part. For Zone1
+---_-----------
Drawing 22-Allocating
zones to a partition
In this screen you set the partitions to which the
zones are allocated. Setting the partitions along
with setting the keypads’ partitions determines
the nature of the system (i.e. Split System /
Partitioned System). Further explanation on
Partition and Split options is found in chapter 2).
5.3.4 Zone Responses (Templates)
2
ENTR ENTRNEXT
X3
Zones
ENTER/NEXT/END
Zones Responses
ENTER/NEXT/END