Pima Hunter-Pro 32 - External Line; Programming Telephone Line

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
67
No. of Rings
ENTER/NEXT/END
In this screen you program the number of rings before the system picks up an
incoming call.
5.4.4.2 External Line
External Line
_
In this screen the area code is programmed in case the system needs an
external line in order to make the call (due to switch-board system or a code to
access the external line).
Entering the number in this screen saves time of re-entering the numbers in all
those screens where telephone numbers for communication are programmed.
5.4.4.3 Programming Telephone Line
PTLLTAVDR
_---+----
To enable feature: “+” under parameter
To disable feature: “-“ under parameter
NOTE:
 To navigate on bar, use and keys.
 In order to change the mark from “-“ to “+” (and vise versa) use
Par. Para. Full
Name
Enabling this parameter means…
P Connected
PSTN
System connected to PSTN line
T
No dial-tone Dials immediatel
y
without checkin
g
first for a dial tone