All-New Event Presentation Switching Solutions
User Manual
General Considerations
To ensure that you can use this product correctly and safely, please be sure to
observe the following precautions:
Before performing any operation, make sure that you have read all the operating
instructions provided by the device, especially the instructions that may endanger
the personal safety and device safety, such as dangers, warnings and cautions, to
minimize the probability of accidents.
All the operations must conform to local safety codes. When the safety and
precautionary measures described in this manual conflict with local safety codes,
please follow the local codes.
The personnel responsible for installing and maintaining the device must be
professionals who have been trained and have mastered the correct operation
methods and all safety precautions. Only trained and qualified personnel can
perform device installation and maintenance.
This device must be used in an environment that meets the design specifications;
otherwise, it may cause device failure. The resulting device function abnormalities
or component damage, personal safety accidents, property losses and other
situations are not included within the scope of the device warranty.
2.1.1 General Safety
When operating the device, you must strictly abide by the local laws and
regulations. The safety precautions described in this manual are only a
supplement to the local safety laws and regulations.
The "Danger", "Warning" and "Caution" items described in this manual are only
supplementary instructions for all safety precautions.
To ensure personal and device safety, please strictly follow all the safety
precautions on the device labels and described in this manual when installing the
device.
2.1.2 Environmental Requirements
Ensure adequate air flow in the equipment room.
Take necessary measures to prevent dust, water and static electricity.
Avoid long-term direct sunlight.
Keep the device away from heat and ignition sources.
Do not place the device in an explosive atmosphere.
Do not place the device in a corrosive environment.
Do not place the device in a strong electromagnetic environment.
2.1.3 Device Safety
Before operating, fix the device on the floor or other stable objects, such as a wall
or mounting bracket.
During transportation and use of the device and its packaging, the device must be
fixed stably to avoid falling.
To Next Page
Loading...