All-New Event Presentation Switching Solutions
User Manual
8 U5/U5 Pro Event Controllers
Startup
Press the button in the upper right corner of the panel, and the system will
automatically start up. After startup, the main touchscreen displays the home screen.
Shutdown
Power off the event controller through the following methods:
Press the button in the upper right corner of the panel, select OK in the pop-
up dialog box on the main touchscreen, and the system will shut down.
During the startup process, hold down the button to force shutdown.
On the main touchscreen, choose Settings > Event Controller at the top and select
the Other tab on the displayed page. In the Event Controller Power area, click Shut
Down, and the device will automatically shut down.
Restart Event Controller
On the main touchscreen, choose Settings > Event Controller at the top and select
the Other tab on the displayed page. In the Event Controller Power area, click Restart,
and the device will automatically restart.
Note
During startup or shutdown, the PIXELHUE logo is displayed on the home screen.
8.3.3 Main Touchscreen
The U5 has a 21.5’’ multi-touch main touchscreen with a resolution of 1920×1080.
The U5 Pro has a 43.8’’ multi-touch main touchscreen with a resolution of
1920×1080.
On the main touchscreen, the built-in software user interface is displayed for you to
do a lot of operations, such as adding devices, configuring screens, configuring
inputs and outputs, configuring gallery, adding and deleting layers, configuring
presets, configuring Multiviewer, importing and exporting project files, configuring
the smart touchscreen, configuring the event controller skin, language and light, and
much more.
The main touchscreen supports the click, double-click, tap and double tap operations
via the connected mouse or your finger.
8.3.4 Device Buttons
The U5 does not support switching between connected devices through buttons,
while the U5 Pro supports switching between up to 16 connected seamless
switchers through buttons. However, the buttons do not page-turning.
When only one device is connected to the U5 Pro, the buttons in its device area will
be automatically used as screen buttons.
To Next Page
Loading...