PIXELHUE P20 - Rear Panel

All-New Event Presentation Switching Solutions
User Manual
5 Hardware Introduction
www.pixelhue.com
35
No.
Type
Description
1
Power button
Power on: Press the button to power on the device.
Power off: Press the button, and a shutdown prompt
window appears on the LCD screen. Click or tap Yes to
shut down the device.
2
LED strip
Indicate the device running status.
3
Touchscreen
Display the device status, menus, submenus and
messages for parameter settings.
4
USB 3.0
A USB type-A port used to update the device, export
device logs, and import and export project files.
5
LINK ports
Reserved ports, used to link two Q8 units for cascading
and control.

3x CXP ports

1x LINK IN

1x LINK OUT

1x OPT
6
LINK port cover
The cover for LINK ports
5.3.2 Rear Panel
The Q8 rear panel provides a variety of I/O connectors including 72x 4K input
connectors (HDMI 2.0, DP1.2, 12G-SDI), 48x output connectors (HDMI 2.0, DP1.2,
12G-SDI, 10G OPT).