Planet WGSW-404 User Manual

- 107 -
recommend keep the value as default - unlimited. Non-flooding or other value will affect the
overall Switch performance as a result in some case.
5.8 Static Filtering
If you select Static Filtering from the Advanced Management screen, the following Static Filtering
screen appears, with Source MAC Address Out-Filters highlighted.
F
IGURE
5-76
From the Static Filtering screen, you can select source and destination MAC address out-filters
(described below), or MAC address in-filters for static filtering by highlighting one of these options and
pressing the Enter key.
5.8.1 Source MAC Address and Destination MAC Address
Out-Filters
To access source or destination MAC addresses, use the following procedure:
1. To access source MAC addresses, select Source MAC Address Out-Filters and press Enter.
When the SRC MAC Out-Filter screen (shown on the following page) appears, go to step 3.

Planet WGSW-404 Specifications

General

Brand	Planet
Model	WGSW-404
Category	Network Router
Language	English