Planet WGSW-404 - ARP Table Settings; DHCP Gateway Settings

- 225 -
2. In the Metric field, type the number of hops associated with the default gateway.
3. Click the Delete button to delete the default gateway.
7.2.3 ARP Table Settings
To access ARP table settings:
 Point to Advanced Setup, point to IP Networking, and click ARP Table. A read-only page similar
to the following appears, showing the Internet addresses and their corresponding physical
addresses, VLAN IDs, and types.
F
IGURE
7-13
7.2.4 DHCP Gateway Settings
To access DHCP gateway settings:
1. Point to Advanced Setup, point to IP Networking, and click DHCP Gateway Settings. A
read-only page similar to the following appears, showing the VLAN IDs and their corresponding IP
addresses, DHCP gateways, maximum hops, delays, servers, and relays.