Planet WGSW-404 - Telnet Logins

- 30 -
F
IGURE
4-11
2. Highlight one of the following choices:
 Disabled — prevents the Switch to automatically reset when a fatal error is detected. This setting
is useful when a persistent problem needs to be reported.
 Enabled — allows the Switch to automatically reset when a fatal error is detected.
3. Press Enter to return to the General screen.
4.3.1.7 Telnet Logins
To enable or disable Telnet logins to the Switch:
1. From the General screen, highlight Remote Telnet Login and press the Enter key. The following
screen appears.