Planet WGSW-404 - Spanning Tree Port States

- 116 -
F
IGURE
5-87
10. Enter the forward delay time, in seconds. Then press Enter. The value you typed appears next to
Forward Delay (sec).
11. Press the Esc key to return to the Spanning Tree Protocol screen.
5.9.2 Spanning Tree Port States
If you highlight Spanning Tree Port States in the Spanning Tree Protocol screen and press the Enter
key, a Spanning Tree Port States screen similar to the following appears. This screen displays
read-only values. When you finish, press the Esc key until you return to the desired screen.