Planet WGSW-404 - Viewing And;Or Changing SNMP Parameters

- 249 -
7.9 Viewing and/or Changing SNMP Parameters
To view and/or change all SNMP-related information, point to Advanced Setup and click SNMP. The
SNMP parameters in Figure 7-44 appear.
F
IGURE
7-49 SNMP C
ONFIGURATION
P
ARAMETERS
1. For SNMP, indicate whether it is enabled or disabled.
2. For Get Community Name, type a get community name.
3. For Set Community Name, type a set community name.
4. Use the four Trap Community text boxes to specify up to four trap community names (one
community name per text box).