Planet WGSW-404 User Manual

- 224 -
17. When you finish making your selections, click the Update Setting button.
7.2.2 Default Gateway Settings
To access default gateway settings:
 Point to Advanced Setup, point to IP Networking, and click Default Gateway. The Default Route
Specifications box appears. This box lets you add or delete a default route specification.
F
IGURE
7-12
To add a default gateway:
1. In the Default Gateway field, type an IP address for the default gateway. The address consists of
numbers separated by periods. For example: 203.70.249.254.
2. In the Metric field, type the number of hops needed between the Switch and the destination
network.
3. Click the Add button to add the default gateway.
To delete a default gateway:
1. In the Default Gateway field, type the IP address of the default gateway you want to delete.

Planet WGSW-404 Specifications

General

Brand	Planet
Model	WGSW-404
Category	Network Router
Language	English