- 229 -
F
IGURE
7-18
B
RIDGING
P
ARAMETERS
1. Use the top drop-down list to disable aging or to set an aging time.
2. If you enable aging, use the Aging Time field to specify an aging time.
3. Use the Flood Limit drop-down list to specify no flooding, controlled flooding, or unlimited flooding
on all ports.
4. If you selected Controlled Flooding in the previous step, enter the maximum flooding value in the
Flood Limit for ALL ports field.
5. Click the Update Setting button.
7.5 Static MAC Filters
To access the static MAC filter parameters, point to Advanced Setup and point to Static MAC Filters.
The options in Figure 7-19 appear.
To Next Page
Loading...
Need help?
General
