Planet WGSW-404 User Manual

- 46 -
F
IGURE
4-28
2. Enter the SLIP address. The address consists of numbers separated by periods. For example:
129.32.0.11
3. After you enter the SLIP address, press the Enter key. You return to the Console Port
Configurations screen and your entry appears in the SLIP Address field.
4.3.3.7 Specifying a SLIP Subnet Mask
If you are using SLIP, enter a suitable SLIP subnet mask.
1. From the Console Port Configurations screen, highlight SLIP Subnet Mask and press Enter. The
Enter IP Subnet Mask screen appears. You must enter a SLIP address before you can enter a
SLIP subnet mask.

Planet WGSW-404 Specifications

General

Brand	Planet
Model	WGSW-404
Category	Network Router
Language	English