Planet WGSW-404 User Manual

- 137 -
8. After enabling the stacking, the current Stack Size and Master Switch ID will be shown as below.
The function of stacking is completed.
F
IGURE
5-112
Note: After stacking is set up, configuration must be executed in the master switch. It is recommended
to re-view the whole stack like “stack ID”, “Switch ID” before enable the stacking.
5.11.2 Stack IP Setting
From the Stacking screen, highlight Stack IP Settings and press Enter. The following screen will
appear:

Planet WGSW-404 Specifications

General

Brand	Planet
Model	WGSW-404
Category	Network Router
Language	English