- 54 -
Note: “Remote” is appended to the VLAN ID automatically if the VLAN is learned from a remote switch.
5. To enter an optional VLAN name, perform the following steps. Note that the VLAN name is used to
identify the VLAN at the local switch.
a. Press the Down Arrow key to highlight VLAN Name.
b. Press Enter. The Enter New VLAN Name screen appears.
F
IGURE
5-6
c. Enter a name for the new VLAN.
d. Press Enter. The VLAN name appears next to VLAN Name in the New VLAN Settings
screen.
6. Press the Esc key. A screen similar to the following appears.
To Next Page
Loading...
Need help?
General
