Polaris RANGER XP 1000 2018 - Page 347

6
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
6.27
4. Assemble the reverse shaft assembly and input shaft
assembly if previously disassembled (see
illustrations).
ITEM DESCRIPTION
q
Bearing
w
Engagement Dog
e
Retaining Ring
r
Washer
t
Low Gear (67T)
y
Needle Bearing
u
Reverse Shaft
i
Gear (48T)
o
Engagement Dog
a
Gear (49T)
s
Bearing
d
Washer
f
Bearing
g
Chain
h
Input Shaft
j
Bearing
5. Install the idler gear shaft assembly
r
and gear
cluster assembly
t
into the transmission housing, all
at the same time.
6. Install the rear output shaft assembly
y
. Rotate
output shaft assembly to align slots with engagement
dog. Ensure bearing is fully seated upon assembly.
7. Assemble shift shaft rail if previously disassembled.
NOTE
Both shift forks need to be orientated the same way, so
that the shift fork pins are both offset to the same side
of the rail.
TRANSMISSION