CIRAS-3 Operation Manual V. 1.09 124 support@ppsystems.com
The connection between the CIRAS-3 console and the external device is made via a USB connection
using the USB cable provided by PP Systems.
To start remote viewing of a CIRAS-3 console on an external device, first select View>Remote Display
in the CIRAS-3 PC Utility software. A message will appear to “Please connect a USB cable between your
desktop and the CIRAS-3 before using this function”.
If the USB cable is not connected connect it at this time and wait for Windows Mobile Device Center
window (green window below) to appear, indicating the device is successfully connected.
Note: For initial installation, the Windows Mobile Device Center requires access to the internet.
To Next Page
Loading...
