CIRAS-3 Operation Manual V. 1.09 21 support@ppsystems.com
Setting up the graphical display for data plots
You have complete flexibility to plot any parameter against time or any parameter against another
parameter. You can also set up to 3 different graph plots along with up to 5 variables. Press Graph Set
(F5) to begin setting up your graphical preferences. Tab from field to field and set your graph settings
exactly as shown below. Press Clear (F5) > OK > Accept (F2) > Accept (F2). Again, when you are in
any field you can press the Expand List (F4) to see all available options for the accessory selected.
Let’s check out both the numerical and graphical display
So by this time you will have everything up and running with the proper system settings and will now be in
a great position to establish a baseline to determine that everything is good to go. After about 3-4
To Next Page
Loading...
