EasyManuals Logo

PP Systems CIRAS-3 User Manual

PP Systems CIRAS-3
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
CIRAS-3 Operation Manual V. 1.09 45 support@ppsystems.com
Battery Pack
For field use the system is powered by internal, rechargeable battery packs. Up until June 2017 the
CIRAS-3 was powered by a single, internal rechargeable 7.2V Li-ion battery pack (Aved) providing
system operation up to 8 hours. Starting in July 2017 we began supplying instruments with two 7.2V (8.7
Ah, 63 Wh) Li-ion battery packs (Inspired Energy) improving system operation for up to 12 hours (actual
operation time will vary depending on environmental control settings).
Battery Pack (Aved)
Part Number 41526-1
Battery Pack (Inspired Energy)
Part Number 41535-1
ALWAYS MAKE SURE THE BATTERY PACKS ARE FULLY CHARGED THE NIGHT BEFORE USE.
Please note that batteries are shipped only partially charged due to shipping regulations. We highly
recommend that you charge them to full capacity upon receipt to avoid any potential damage or loss of
battery life.
TIP
To reduce the weight of the CIRAS-3 console
approximately 0.2 kg you can remove one of the
battery packs providing up to 6 hours of
continuous use (depending on settings and
controls) in the field. We recommend 2 battery
packs for normal use but if one battery pack is
used it must be placed in the lower battery
compartment which is the one that is flush with the
inside battery compartment door as shown here.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PP Systems CIRAS-3 and is the answer not in the manual?

PP Systems CIRAS-3 Specifications

General IconGeneral
BrandPP Systems
ModelCIRAS-3
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals