CIRAS-3 Operation Manual V. 1.09 83 support@ppsystems.com
To move a copy of the data file from the Internal Memory to the USB Memory, locate the file and when
highlighted press OK. A check mark should appear next to the file. Next press Export (F3). A file that
has been transferred is indicated by an asterisk symbol (*) on the right side of the location field, next to
the file name. Note that the file remains in its original location – files can be deleted from Internal Memory
by pressing Delete Int Files (F6).
You can also import data files back to Internal Memory, for example, to quickly review the data using
Operations (F1) > View Saved (F4). To move a copy of a data file from the USB Memory to Internal
Memory, select the file and press Import (F2). Again, the file remains in its original location – files can be
deleted from USB Memory by pressing Delete Ext Files (F5).
To transfer CIRAS-3 settings files, from the Numeric or Graph View screens select Settings (F2) >
Transfer (F3), then follow the instructions above. To transfer CIRAS-3 response curve scripts, press
Operations (F1) > Rec Options (F2) > Edit Rsp Crv (F5) > Transfer (F5), then follow the instructions
above.
To Next Page
Loading...
Need help?
General
